; Extended OS/2 NIF file

[E1000]
   Type = NDIS
   Title = Intel(R) PRO/1000 Network Connection
   Version = 3.60
   Drivername = E1000$
   Xports = NETBEUI LANDD
   Copyfile = e1000.msg

[FILE]
   Name = E1000.OS2

[SPEEDDUPLEX]
   display = "Media Speed & Duplex"
   type = Decimal
   set = 0, 1, 2, 3
   optional = YES
   editable = YES
   help = "The driver can configure the adapter for 10, 100, or 1000 Mbps.
 Assigning a value to this parameter will override the Auto-Speed-Sense feature
 of the driver.  Leave the field blank to enable the Auto-Speed-Sense feature.
 Note that speed of 10 or 100 is only valid for Copper based NICs.
 0 = 10 half; 1 = 10 full; 2 = 100 half; 3 = 100 full."

[SLOT]
   display = "Slot/Device Identifier"
   type = Hexadecimal
   range = 0-1FFF
   optional = YES
   editable = YES
   help = "This parameter is only required in systems with more than one
 adapter installed. If you are installing more than one PCI adapter: 1) complete
 the configuration process, but leave the Slot field blank for each driver;
 2) restart the system and record the list of Slots that each driver displays;
 3) complete the configuration by assigning one of the values from the list to
 the Slot parameter of each driver. Leave the field blank if you have only one
 adapter installed."

[NODE]
   display = "Locally Administered Address"
   type = String
   strlength = 12
   optional = YES
   editable = YES
   help = "Use this parameter to set the network address used by the adapter."

[UPDRBOOT]
   display = "Update Remote Boot Protocol"
   type = Decimal
   set = 0, 1, 2
   optional = YES
   editable = YES
   help = "Use this parameter to change the Intel Boot Agent protocol setting. The setting will
 be updated the next time the driver is started. Valid values are: 0 (no change), 1 (PXE) or 2 (RPL)."